Main >> Transfercase >> Factory >> NP-208
  

From JeepTech and JeepTech Publishing LLC, the Jeep knowledge base.

All text is available under the terms of the GNU Free Documentation License.

 

The NP208 has a aluminum case and an appearance similar to many other chain driven New Process transfer cases. It should have a tag on the back saying New Process Gear, Model 208. It is chain driven transfer case with a 23 spline input and standard round bolt pattern. The output for the front driveshaft is on the drivers side. Low range is around 2.62 and high is 1.00.

 

Usage

Full size Cherokees used the NP208 from '80-'83 and the J-trucks used it from '80-'86 or '87. The NP208 was the "Command-Trac" option for full size Jeeps during this time period.

 
All text is available under the terms of the GNU Free Documentation License.
Simple HTML for this page here.