Jeepfan.com
serving the Jeep community since 1997
KC HiLiTES all new 6” LED Daylighter® Systems are a performance off road LED light in an all metal housing. Pair Pack System comes with two 6” Gravity LED lights (20W each, 40W Total), switch kit and wire harness. Features KC’s patented Gravity Reflective Diode (GRD) Technology for a more controlled and farther reaching light …
Continuing from Page 1 of this little winter event to get groups out for some winter off roading at AOAA. The Northumberland County Anthracite Outdoor Adventure Area (AOAA) is a 6,500 acre motorized and non-motorized recreation facility with its welcome center and parking lot located at 4100 State Route 125, Coal Township, PA 17866-7806. Phone number …
Thanks to Hans for putting together this little winter event to get groups out for some winter off roading at AOAA. The Northumberland County Anthracite Outdoor Adventure Area (AOAA) is a 6,500 acre motorized and non-motorized recreation facility with its welcome center and parking lot located at 4100 State Route 125, Coal Township, PA 17866-7806. …
For the month of February, leading Jeep aftermarket retailer Quadratec is looking for three lucky people to take its money. Well, not all of it, but $3000 worth to purchase any Smittybilt-branded part or accessory available at www.Quadratec.com. See, Quadratec and Smittybilt understand that the only thing better than modifying your vehicle with great Jeep …
Recently we installed a Warn VR10-S winch on the jeepfan.com 1978 CJ-5. We liked the winch so much we decided to put one on the jeepfan.com 2016 Rubicon Hard Rock as part of a bumper upgrade with some Maximus-3 components. If your Jeep is equipped with a 10A style bumper, found on the 2013 10th …
With the final year of the JK coming to an end Jeep introduced a special edition model Rubicon that goes a little further than the Hard Rock edition. Not much detail on the new heavier front axle and heavier rock rails is indicated yet. It appears to already have a lift installed and 35″ tires …
Continuing from page 2 the winch is installed and wired up and the bumper is nearing the point of being reinstalled. According to the directions a small part of the front of the bumper needs to be trimmed away. The amount will depend on the age of the bumper. Luckily this area is covered by …
Continuing from page 1. Leading up to this point the bumper was removed and some small details need to be taken care of. Starting from here the winch mount and winch will get fit up and installed. Depending on your type of winch will determine if the factory vacuum pump will need relocation. Test fitting will …
In 2013 Jeep released a special model Rubicon to celebrate the 10th anniversary of the model. This model had extra features including steel front and rear bumpers, a first for the JK. If you own a JK Wrangler that is a 10th Anniversary (2013), Rubicon X (2014), or Rubicon Hard Rock (2015-2017) running the stock …
In Part 1 we installed a Warn VR10-S Winch onto the jeepfan.com 1978 CJ-5 and are now in need of some wiring. Wiring Getting the wiring from the winch to the battery on a CJ is pretty straight forward. We ran the wire inside the grill and exited behind the passenger side headlight through the …
