Jeepfan.com
serving the Jeep community since 1997
Question: Hello, I Have a 1976 CJ-5 with a 258 6cyl. 3spd. tranny. I bought a 1964 model 318 engine. I thought i could put it in my jeep and use the same tranny. I am having trouble finding any information on where to find a bellhousing that will fit. I’m not sure if i …
New Information – After two years of driving with the T-18 I am still pleased, one problem I have had is a clutch binding issue. I determined that the problem was in the bell housing and would not be easy to fix due to the transmission being extremely heavy and cumbersome to remove. I have …
After several trail runs with my 78 CJ-5 equipped with a T-150 3 speed trans it became obvious that a gear change was essential. My CJ has 3.54 rears, a Dana 20 transfer case (2:1 low range), and low a gear in the T-150 that is only 2.99:1. This equates to approximately 21:1, this is …
