Jeepfan.com
serving the Jeep community since 1997
One evening in late spring I took my family for a ride in the jeepfan.com 78 CJ-5 which was recently re-assembled from a new Holley Truck Avenger carburetor and some exhaust work. Upon returning home there were 3 CJ’s parked in front of my house, Rich, Mark, and Mike. They were out for some pre-summer …
A reader writes us and asks…Does an 1982 CJ-7 jeep originally have a back bumper ? Need to know for WV inspection sticker. Thanks, John Well John, the 80’s version of the CJ never had an actual rear bumper. Occasionally there were dealer installed bumpers and factory installed “bumperettes” on Laredos and Renegades which were …
QUESTION: What do I need to put a TH350 transmission in my 1977 CJ-7 with the 258 I6 and a Dana 20 T-case? Mike D ANSWER: Several companies offer adapters for this popular conversion. Novak Adapters are probably the best on the market. In this conversion you will need two adapters. The first adapts the …
windy, windy, windy. A small group of friends gathered to hit the trails at Rausch Creek for a shake off the rust and get out of the house from a long winter. Page 3 [wpcol_2third id=”” class=”” style=””] Continuing our photo album outlining our day…enjoy [/wpcol_2third] [wpcol_1third_end id=”” class=”” style=””] rock buggy in action …
windy, windy, windy. A small group of friends gathered to hit the trails at Rausch Creek for a shake off the rust and get out of the house from a long winter. Page 2 [wpcol_2third id=”” class=”” style=””] Continuing our photo album outlining our day…enjoy [/wpcol_2third] [wpcol_1third_end id=”” class=”” style=””] get off the phone! …
windy, windy, windy. A small group of friends gathered to hit the trails at Rausch Creek for a shake off the rust and get out of the house from a long winter.
QUESTION: I have 72 CJ-5 and I am swapping the AMC 304 with a Chevy 350. I am wondering what would be the best transmission to use? I have a 700r4 but think it will be too long which would only give me about a 6 inch rear drive line. I would like to use …
QUESTION: Good evening, a while back I traded into an old Jeep long abandoned. I can’t identify whether it is an M38-A1 or CJ-5. The serial plate is long gone, it has a Ford V8 so no correct engine, and no title. Where else on this thing should a valid number to identify it so …
Fuel Pump Installation The fuel pump is going to be mounted in the same location as the Pro-Jection pump which is located on the passenger side frame rail above the rear spring perch. The new pump hangs a little low, not that it would be hit by anything but sticks or brush could get tangled …
A new gasket was placed on top of the manifold and the carb was bolted in place following the tightening procedure outlined in the manual. Now that the Getting the carb in is only a small battle in completing this project. Fuel lines, throttle cable, vacuum lines, and choke power are some of the things …
